|
| HU10 Mechanical seal |
|
|
Structure Features:
Mechanical seals of the HU10 are accord with DIN 24960,single face single spring, and unbalanced structure; by shifting fork drive, Spring base are contact with impeller by means of two pins, it is independent of rotation direction of pump shaft, axial length is shorter.
Sub-materials of friction and auxiliary materials should be selected according to operation condition. |
Operating Range:
Sealed Medium: oil, water, sewage water, low acid, low alkali, and dissolubility solvent, etc.
Pressure in the sealed chamber: ≤1Mpa
Temperature in the sealed chamber: -20℃~180℃
Linear velocity: ≤10m/s
|
|
| HU11 Mechanical seal |
|
|
|
Structure Features:
Mechanical seals of the HU11 are accord with ISO3069、DIN 24960 & GB655. Unbalanced, single spring, single face, thrust ring and the rotating ring by means of pin drive, push ring and spring base shifting fork drive structure and direction of rotation is independent of spindle.
Sub-materials of friction and auxiliary materials should be selected according to operation condition. |
Operating Range:
Sealed Medium: water, oil, acid, alkali, under middle of corrosive chemical mediums and chemical solvent, etc.
Pressure in the sealed chamber: ≤1Mpa
Temperature in the sealed chamber: -20℃~150℃
Linear velocity: ≤25m/s |
|
| HB11 Mechanical seal |
|
|
Structure Features:
Mechanical seals of the HB11 are accord with ISO3069、DIN 24960 & GB655. Balanced, single spring, single face, thrust ring and the rotating ring by means of pin drive, push ring and spring base shifting fork drive structure and direction of rotation is independent of spindle.
Sub-materials of friction and auxiliary materials should be selected according to operation condition. |
Operating Range:
Sealed Medium: water, oil, acid, alkali, under middle of corrosive chemical mediums and chemical solvent, etc.
Pressure in the sealed chamber: ≤3Mpa
Temperature in the sealed chamber: -20℃~150℃
Linear velocity: ≤25m/s
|
| |
|
|
