Does not have the restraint (HWY) the ripple compensator

Product code number mark demonstration: (16HWY/400 Х 6-F)

Expressed the nominal passes diameter Phi 400mm, the working pressure is 1.6MPa, compensates the quantity is 200mm, the carbon steel flange connection non- restraint compensator. If needs to take over control the connection to ask the sign to pour J, if needs the flange either takes over control for the stainless steel material quality in F or J add-on B.

Operating instructions that,

"Does not have the restraint" is because the former axial compensator has more restraints condition to the use to acquire fame. It completely eliminated formerly the axial compensator to guide the support spacing L1 <= 4D, L <= 14D and the L3 request. My factory production non- restraint compensator has achieved the pipe support spacing "does not have the restraint" the final target. Non- restrains the compensator not only to have the columnar stability, but also has self-directed to the ability. Therefore it completely eliminates 4D, 14D, the L3 restraint, overcomes the wiring error, the volume slightly, the safe reliable characteristic, was allowed to eliminate formerly the axial compensator to be easy to occur and loses and so on the common disease steadily, and has also brought very big convenient to the pipeline heat preservation.

Does not have the restraint compensator to be definite and the fixed bearing thrust force computation in the fixed support spacing and the ordinary axial compensator quite same not less than. In order to stably cause the project to be reliable, does not have the restraint compensator to approach the fixed support installment besides the request, still requested in each fixed support spacing to suppose three guidances supports.

Does not have the restraint compensator to be possible to be built on stilts, the ditch using the pipeline lays, also may apply to has compensates straight buries lays, this time the compensator place should suppose the inspection well or the darkroom.