Characteristic and merit:
1st, reasonably assembles set of rubbers attachments to be possible to reduce structure transmission noise 15~25dB (decibel);
2nd, uses the multi-level sphere structure, attracts inspires the ability strongly, reduces chirp the effect to be remarkable;
3rd, may withstand the higher working pressure, anti- explosive force big, the elasticity is good;
4th, can deflect the displacement, prevent the foundation settlement causes harm;
5th, can elongate the compression, prevent the pipeline thermal expansion contraction brings break;
6th, can connect the eccentric pipeline, is advantageous for the installment replacement, simple is nimble;
7th, the main body uses the polar rubber, heat-resisting, is anticorrosive, bears the aging.
Use:
1st, construction, factories and mines, housing water dim daylight ventilating duct system;
2nd, gives water draining water and the circulating water pipeline, the sanitation system pipeline;
3rd, ships, naval vessel pipeline, petroleum chemical industry pipeline;
4th, fire, compressor pipeline;
5th, other piping systems.
Engineering factor
Model |
KXT- （ l ） |
KXT- （ ll ） |
KXT- （ lll ） |
Working pressure Mpa(kg.f/cm2) |
1.6 （ 16 ） |
1.0 （ 10 ） |
0.6 （ 6 ） |
Bursting pressure Mpa(kg.f/cm2) |
6.0 （ 60 ） |
3.0 （ 30 ） |
1.8 （ 18 ） |
Vacuum degree KPa (mmHg) |
86.7(650) |
53.3(400) |
40(300) |
Is suitable the temperature .°C |
-20 ～ +115 |
Is suitable the medium |
Air, compressed air, water, sea water, hot water, weak acid and so on |
The attachment beginnings and ends may wilfully deflect, are advantageous for the free adjustment axial or the lateral shear. |
Note: DN350~400, the working pressure is 1.0; DN450~1000, the working pressure is 0.6 |
The nominal passes the diameter, the length, the displacement value and the flange main data sheet
The nominal passes the diameter
DN |
Length
L
(mm) |
Bolt number
n |
Bolt hole diameter
D0(mm) |
Bolt hole center round diameter
(mm) |
Axial displacement
(mm) |
Lateral shear
(mm) |
Deflection angle
(a1+a2) |
(mm) |
( 寸 ) |
Elongation |
Compression |
32 |
(11/4) |
95 |
4 |
17.5 |
100 |
6 |
9 |
9 |
15° |
40 |
(11/2) |
95 |
4 |
17.5 |
110 |
6 |
10 |
9 |
15° |
50 |
2 |
105 |
4 |
17.5 |
125 |
7 |
10 |
10 |
15° |
65 |
(21/2) |
115 |
4 |
17.5 |
145 |
7 |
13 |
11 |
15° |
80 |
(3) |
135 |
130 |
8 |
17.5 |
160 |
8 |
15 |
12 |
15° |
100 |
(4) |
150 |
135 |
8 |
17.5 |
180 |
10 |
19 |
13 |
15° |
125 |
(5) |
165 |
160 |
8 |
17.5 |
210 |
12 |
19 |
14 |
15° |
150 |
(6) |
180 |
185 |
8 |
22 |
240 |
12 |
20 |
22 |
15° |
200 |
(8) |
190 |
200 |
8 |
22 |
295 |
16 |
25 |
22 |
15° |
250 |
(10) |
230 |
240 |
12 |
22 |
350 |
16 |
25 |
22 |
15° |
300 |
(12) |
245 |
260 |
12 |
22 |
400 |
16 |
25 |
22 |
15° |
350 |
(14) |
265 |
16 |
26 |
460 |
16 |
25 |
22 |
15° |
400 |
(16) |
265 |
16 |
26 |
515 |
16 |
25 |
22 |
15° |
450 |
(18) |
265 |
20 |
26 |
565 |
16 |
25 |
22 |
15° |
500 |
(20) |
265 |
20 |
30 |
620 |
16 |
25 |
22 |
15° |
600 |
(24) |
265 |
20 |
26 |
725 |
16 |
25 |
22 |
15° |
700 |
(28) |
260 |
24 |
30 |
810 |
16 |
25 |
22 |
10° |
800 |
(32) |
260 |
24 |
30 |
920 |
16 |
25 |
22 |
10° |
900 |
(36) |
260 |
24 |
30 |
1020 |
16 |
25 |
22 |
10° |
1000 |
(40) |
260 |
28 |
30 |
1120 |
16 |
25 |
22 |
10° |
Note: Other standards or the non- standard flange must order separately the agreement, indicates the standard or provides the blueprint and the related data, this factory may have custom-made the production. |
