The nominal passes the diameter
Mm |
Working pressure MPa |
Bevelling radius mm |
Least curving number of times |
Supplies goods the length |
F |
W |
F |
W |
F |
W |
F |
W |
15(1/2 ″ ) |
≤ 1.8 |
≤ 5.0 |
≥ 30 |
≥ 50 |
25 |
50 |
≥ 200 |
≥ 300 |
20(3/4 ″ ) |
≤ 1.6 |
≤ 4.0 |
≥ 40 |
≥ 70 |
20 |
40 |
25(1 ″ ) |
≤ 1.2 |
≤ 3.0 |
≥ 50 |
≥ 90 |
15 |
30 |
Installs the use matters needing attention:
1st, the basis must connect the beginnings and ends attachment size and the
dislocation situation, choose the accurate product model and the appropriate
length.
When 2nd, installs, first twists the beginnings and ends the attachment, will attach the distinction first to install to the air blower plate tube supplies on the backwater pipeline connection,
Should seal, screw tight.
3rd, when carries on to the ripple soft attachment , should the nut set to the ripple soft attachment beginnings and ends, in order to avoid the corrugated pipe is curving time nut deactivation.
4th, the attention in the installation process, do not have with to be hard hits crowds, do not have to damage the packing surface.
|
